INDUSTRIAL SAFETY CHECKLIST 1

Posted by Safety Acts | 11:43 PM | | 0 comments »

Here are the practical recommended checklists to maintain safety:

1. All power room and electrical room must be kept  clean and accessible at all times
2. No combustible  materials near the electrical conductors, panel boardsm switchgear room and electrical rooms.
3. All electrical panel boards must be accessible and free from obstructions.
4. There must be installed emergency lights, exit lights, evacuation route plan located at strategic locations.
5. Always observe lock-out-tag-out during repair,maintenance and temporary installations.
6. Proper identification of phase and phase sequence of terminals at panel boards are properly identified to avoid reversal of motor rotation and balancing of single phase loads.
7. Using of extesion cords must be for temporary only . It's load must not exceed 180 W. Avoid too much interconnection of  extension cords.
8. All conductors/wire must have proper conduit to protect them from physical damages.
9. Properly support the lighting fixture and proper illumination for particular type of activity
10. Always return dead front cover of panel board and provide proper circuit directories.

0 comments